When: Wednesday, 25 November, 12:30 pm AEDT
Where: This seminar will be presented at the ACFR seminar area, J04, Level 2 (Rose St Building) and partially online via Zoom. RSVP
Title: 1) Lightning Talk: Overcoming Trade-Offs in Robotics with Symmetry. 2) Astronomical Instrumentation as a Proving Ground for Mechatronics
Speaker: Dr Pieter van Goor & Mr Adam Taras
Abstract:
Lightning Talk: Overcoming Trade-Offs in Robotics with Symmetry
Robotics involves trade-offs between efficiency, accuracy and reliability, but these compromises are not always fundamental. By exploiting symmetry, algorithms can reduce approximation errors, eliminate redundancy and provide rigorous performance guarantees without additional computational cost. Our work on Equivariant Filters demonstrates these benefits across visual-, LiDAR-, radar-, acoustic- and depth-aided inertial navigation. By respecting the intrinsic geometry of robotic systems, these filters improve accuracy, consistency and robustness while retaining the familiar computational structure of conventional Kalman filters. We have further shown that many modern inertial navigation filters correspond to different symmetry choices, each revealing distinct advantages and limitations. More recently, we introduced weak invariance, extending symmetry-based methods beyond classical assumptions to systems with relative dynamics and imperfect models. This provides a foundation for learning-enabled robotics. By placing symmetry at the centre of algorithm design, we aim to enable more capable, reliable autonomy using existing computational, sensing and data resources.
Astronomical Instrumentation as a Proving Ground for Mechatronics
Future searches for signs of life on exoplanets will require astronomical instruments that push the performance of optical sensing and control. Many of the challenges are similar to that of more conventional mechatronics systems: optimising coupled systems, extracting information from noisy measurements, and controlling disturbances in real time. In this talk, I explore two examples of this in my recent work: differentiable design of an optical system to reach the limits of sensing wavefront aberrations, and data-driven predictive control on a stellar interferometer to match the optical path length between telescopes 100’s of meters apart to sub-100nm levels.
Bio:
Dr Pieter van Goor is a lecturer at the School of Aerospace, Mechanical, and Mechatronic Engineering (AMME) in the Faculty of Engineering at the University of Sydney. Previously, he was a postdoctoral research fellow with the Robotics and Mechatronics (RAM) group at the university of Twente, supervised by Antonio Franchi and supported by the Marie Sklodowska-Curie Action of the European Research Council. Before that, he worked as a research fellow in the Systems Theory and Robotics (STR) group at the Australian National University (ANU) on the development of equivariant systems theory and applications to problems in robotics and control. His PhD was awarded in 2023, in which he studied equivariant observer design and its application to problems in visual spatial awareness under the supervision of Robert Mahony at the ANU.
Adam Taras is a PhD candidate at Leiden University in the Netherlands, developing technologies for the next generation of ground-based telescopes to support future searches for signs of life on exoplanets. This involves a combination of simulation, lab work and on-sky testing, with contributions to both the MagAO-X (Magellan Clay telescope) and Asgard (Very large telescope interferometer) instruments. He completed his undergraduate studies at The University of Sydney in 2023 (B. Eng. Mechatronics and B. Sci. Physics, with research projects and an Honours thesis at the ACFR under Dr. Dansereau) and a M. Phil. in 2025. Adam’s professional interests lie in the areas of instrumentation, metasurfaces, and harnessing the power of forward modelling to optimise system design and data analysis.